Addition silicone for laboratory duplication. Suitable for all duplication techniques in cases requiring rapid duplication. Ideal for duplicating models with lightly marked undercuts and coatings. The use of plastic duplication flasks is recommended. ADVANTAGES: Speed: a duplicate is obtained in just 10 minutes (23°C), Easy mixing due to the 1:1 ratio between base and catalyst, High fluidity, Absolute pressure to faithfully reproduce details, Long-lasting dimensional stability and non-deformability to allow for multiple duplications, Compatible with all gypsum, polyurethane resins, phosphate coatings, and with alcohol and acrylic resins. CHARACTERISTICS: Extreme fluidity, Versatile due to the hardness of 22 Shore A, Orange color. TECHNICAL DATA: Mixing ratio Base: Catalyst 1:1, Manual mixing time (23°C/73°F) 1 min, Mechanical mixing time (23°C/73°F) 30 sec, Total working time (23°C/73°F) 5 min, Setting time (23°C/73°F) 10 min, Hardness after 24 hours (shore A) 22, Detail reproduction 20 µm, Dimensional variation after 24 hours -0, 0.05, Elongation at break 450%, Tear strength 5 N/mm².